How to Compile the Linux Kernel
You may be interested in a newer series on kernel-building by Akkana Peck:
Building Your Own Linux Kernel, part 1
Building Your Own Linux Kernel, part 2
Building Your Own Linux Kernel: Tricky kernel options (part 3)
RedHat is not Linux, it is a distribution based on the Linux kernel. The Linux kernel is a complex program which provides the underlying services to the rest of a Linux distribution. But it is easy to add new features or improvments to it as, unlike commercial operating systems like Windows 95 or MacOS, the source code is freely available. It is common practice with a Linux based operating system to recompile the kernel from source and much effort has been put in to make this a realitively user-friendly experience.
Why Compile a New Kernel?
You may be thinking "But why recompile it? It works fine as it is." There are three reasons for a recompile. Firstly, you may have some hardware that is so new that there's no kernel module for it in on your distribution CD. Secondly, you may have come across some kind of bug which is fixed in a revision of the operating system. Lastly, you may have some new software which requires a newer version of the operating system.
Getting the Kernel Sources
The most recent releases of the kernel sources are available on ftp.kernel.org. This site is mirrored worldwide so there is probably a fast copy of it somewhere near you. Locate the file for the latest version of the operating system and download it to /usr/src. Then issue the tar zxf command to unpack it.
|Alternatively, if you already have the kernel sources and only need to upgrade one version number (from 2.2.1 to 2.2.2 for instance) then download the patch file to
to upgrade your old kernel sources. Patch files are much smaller to download than the whole thing.
If you do not need the very latest version, then installing a kernel source package from your distribution CD may be an easier way to proceed.
Configuring For a Build
Change directory to /usr/src/Linux and issue the command:
This will build a few programs and then quickly pop up a window. The window menu lets you alter many aspects of kernel configuration.
After you have made any necessary changes, save the configuration and follow these instructions--do a
make dep; make clean
The first of these commands builds the tree of interdependencies in the kernel sources. These dependencies may have been affected by the options you have choosen in the configure step. The make clean purges any now-unwanted files left from previous builds of the kernel.
Then you are ready to go! Issue this command:
and then, if you are on a machine slower than a Pentium 200, go and make a cup of tea. This takes about 20 minutes on a Pentium 90...the kernel has a lot of source code as you may have noticed when downloading it. When this is complete do a:
This will not take as long.
Installing a New Kernel
Phew, finally! The last step is installing the new kernel. On an Intel-based system the kernel is installed to the right place in /boot with the command
cp /usr/Linux/src/arch/i386/boot/zImage /boot/newkernel
This will install the modules in /lib/modules. Next, edit /etc/lilo.conf to add a section like this
image = /boot/newkernel
label = new
At the next reboot, select the kernel 'new' in lilo, and it will load the new kernel. If it works fine, move it to the first position in the lilo.conf so it will boot every time by default.
Compiling the kernel is a relatively simple operation- if you have done it before! At first it can seem daunting. There are many Web sites dedicated to the kernel; at the left are just a few.
Solid state disks (SSDs) made a splash in consumer technology, and now the technology has its eyes on the enterprise storage market. Download this eBook to see what SSDs can do for your infrastructure and review the pros and cons of this potentially game-changing storage technology.