April 19, 2018

New HOWTO: XFree86 Font Deuglification Mini HOWTO - page 4

Table of Contents, Section 1

  • March 23, 2001
4. XFree86 4.x

[http://www.xfree86.org/4.0/] XFree86 4.0 introduced native support for
TrueType fonts, along with other new features. The enhanced font support is
based on xfsft from Juliusz Chroboczek, which in turn is based on the
FreeType font library originally from Mark Leisher, so the configuration is
similar to xfsft and Redhat's patched xfs. 

The FontPath is still in XF86Config, as always. For Redhat 6/7 using a stock
XFree86 4.x (i.e. NOT the Redhat 7.x supplied version), this will mean moving
the Redhat xfs FontPath from /etc/X11/fs/config back to XF86Config. A
separate font server is no longer needed just for TrueType support. You may
disable it, unless it is needed to serve fonts to other clients in a network
environment. See the section below for Redhat 7.x specific configuration

     Section "Files"
      FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
      FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
      FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
      FontPath "/usr/X11R6/lib/X11/fonts/misc"
      FontPath "/usr/X11R6/lib/X11/fonts/Type1"
      FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
      FontPath "/usr/share/fonts/default/Type1"
      FontPath "/usr/local/share/fonts/ttfonts"
      FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
      FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
In order to use TrueType, you must also specify which font module the X
server should be using in the "Module" section:

     Section "Module"
      Load  "freetype"
      Load  "speedo"
      Load  "type1"
Note that there can be only one 'Module' section, so include any other
modules here as well.

You also must to create fonts.scale and fonts.dir file for each TrueType font
directory, just like for xfsft and Redhat's xfs. [http://
www.joerg-pommnitz.de/TrueType/ttmkfdir.tar.gz] ttmkfdir will come in handy
for fonts.scale. See the xfs Section 3.2.2 above for more details and

xtt is another available TrueType module that is best known for supporting
ideographic (Oriental) type fonts. You can use either, but only one at a

X server commandline options are still the same as previous versions of X:

$ startx -dpi 100

4.1. Redhat 7.0 Differences

Redhat 7.0 introduces some changes to X configuration over previous Redhat
versions. It is also different from the stock XFree86 configuration as
addressed above. Notable differences:

  * Both XFree86 3.3.6 and 4.01 are included. If upgrading you may wind up
    with 3.3.6. The X configuration file is XF86Config for 3.3.6 and
    XF86Config-4 for 4.x. Of course, you'll need to know which is which for
    editing and configuration purposes.
  * xfs is still handling all font duties. A default Redhat 7.x installation
    does not use the 'modules' section of XF86Config. Instead it relies on
    xfs. This is different from a stock installation of XFree86 4.x where the
    X server does all the font work -- including TrueType.
  * The socket for xfs is "unix/:7100" with RH 7.x, as opposed to "unix/:-1"
    in previous versions.


Most Popular LinuxPlanet Stories

Sitemap | Contact Us