Back to article
Giving VoIP Traffic the Green Light, Part 3
Wondershaper Status: Clearing the Queue
July 10, 2006
Last week we left off with using Wondershaper to improve network performance by, somewhat paradoxically, throttling our line speeds to less than their maximum. Today we'll learn how to prioritize specific types of network traffic.
But first, I must make a small but important correction. Unless you are running
Debian, before you can run Wondershaper from the command line you must make
one edit in the
echo Please read the documentation in 'README' first :-) exit
Now you can run the
Wondershaper displays its current status with this command:
# wshaper status
Use this command to turn Wondershaper off:
# wshaper clear eth1
It might take a bit of experimenting to find the optimum settings. Typically, around 90 percent of your maximum line speed works well. Start low and work your way up. If your Internet line is used primarily for VoIP, and not a lot of other traffic, this could be all you need to do to ensure decent VoIP performance.