Back to article
Turn an Old PC Into a Multi-Purpose LAN Server with ZeroShell (part 1)
Setup, Using Zeroshell With an Existing Router
April 20, 2009
Have a spare PC gathering dust? Turn it into a multi-purpose server using ZeroShell. Whether there's a real need or you want to do some tinkering around, you ought to find something useful in ZeroShell. Best of all, its Linux-based, open sourced, and free.
ZeroShell is a live CD and doesn't have to be installed. Just pop in the disc and it will boot. You only need a small drive--flash will do--to store the settings.
Here are just some of the features provided by ZeroShell:
For a complete list, see their website.
Setting up ZeroShell
First things first--gather the hardware. Zeroshell should work well on just about any computer, on typical 32-bit PCs, and higher performance 64-bit machines. An old dusty box loaded with a network adapter or two should be fine. But keep in mind, you'll need at least a Pentium 233MHz processor, 96MB of RAM, and a CD-ROM (ATA) drive, or an ATA Compact Flash (CF) adapter for embedded devices. So you can store your configuration, you'll want some type of storage device, such as a IDE, SATA, or SCSI hard drive; or a external or flash USB drive. All the typical VGA graphic cards and RS232 serial port adapters are supported. Additionally, ZeroShell supports all the Linux-capable PCI, USB and PCMCIA network cards.
If you want to replace your wired or wireless router with ZeroShell, you'll need at least two Ethernet cards loaded in the PC. That way one can plug into the Internet modem and the other to a computer or a switch. To support multiple
When you're ready to get started, download the CD image (ISO) file from ZeroShell's site and burn it to a CD. Then pop it in the machine you've crafted. Plus make sure you have the machine connected to your router, or directly to the Internet connection, with an Ethernet cable. Once it boots up, you'll see the main command-line menu. The default login credentials and IP address is shown in the upper right corner of the screen.
Before anything, you should change the default password. From the main menu, type P, enter a new password, and hit Enter.
Using ZeroShell along with an existing router
There's two different ways you can integrate ZeroShell into your network. You can either use it to replace an existing router or keep the router and connect the computer to the network. We're first going to discuss the latter, which is easier and still lets you take advantage of other services provided by ZeroShell. This way you don't have to configure the routing and DHCP features of ZeroShell; your existing router can still do those jobs.
In order for ZeroShell to communicate with the network, it must be in the same subnet of the network. By default, ZeroShell assigns itself an IP of 192.168.0.75. Thus if the existing router is in the 192.168.0 subnet (for example, if it has an IP of 192.168.0.1), no further configuration is necessary. However, if the router is in another subnet, you need to change the default IP settings of ZeroShell; here's how: (see page 2)